Qiaoshan brand nitrocellulose enamel for external use

Scope of Application
This quick-drying paint produces a smooth, glossy finish with good weather resistance and vibrant color. It is primarily used for the protection and decoration of various vehicles, machine tools, machinery, and woodwork.

**Preparation Notes:**
**Before use, the paint should be thoroughly stirred. If coarse particles or mechanical impurities are present, it must be filtered. Application is primarily by spraying. Use X-2 nitrocellulose lacquer thinner (thinner) as the thinner.
**In high humidity environments, if the paint film turns white, add an appropriate amount of F-1 nitrocellulose lacquer moisture-proofing agent (whitening agent) to adjust.
**This paint should be applied over a primer-coated surface for better adhesion. It is recommended to use a primer compatible with nitrocellulose lacquer.
**The interval between two coats should be approximately 10 minutes.** Xunwang Qianming

Surface Treatment and Construction Methods
Preparation for Wood Painting
Various Colored Nitrocellulose Clear Lacquer Q14~31
Original Lacquer Appearance and Transparency
Film Color and Viscosity (Ford Cup 1), S = Drying Time, min ≤ Surface Dry
Transparent, without significant mechanical impurities, conforms to standard sample, smooth and flat 100
1560
Application Scope
Used for topcoating colored metal products or marking instruments.

Making it Visible

The lacquer must be stirred evenly before use. If there are coarse particles or mechanical impurities, it must be filtered. ● Application is primarily by spraying. X-2 nitrocellulose lacquer thinner (thinner) can be used as a thinner. ● The ideal viscosity for application is 17-21S, with a pressure of 3-5 kg/cm². The interval between two spray coats should be approximately 10 minutes. ● In damp environments, if the paint film becomes brittle, F-1 nitrocellulose lacquer moisture-proofing agent (water-based) can be used to adjust it.

1. Ensure the surface is clean and free of grease.

2. Allow the lacquer to dry for one to two days to obtain a stable base coat.

3. After drying, apply at least one layer of fully volatile thinner (thinner coat). Apply several coats if necessary.

Treating Rust
1. Use a spatula to remove the flaky rust flakes. Check the surface to ensure no rust residue remains.

2. Before the rust thickens, apply a primer to the wall and metal components, then apply a thin coat to the affected areas.

Stir the paint thoroughly before use. If there are coarse particles or mechanical impurities, filter it. ● Application is mainly by spraying. X-2 nitrocellulose lacquer thinner (thinner) can be used as the thinner. ● The application viscosity should be 17-21S, pressure 3-5 kg/cm, and the interval between two sprays should be about 10 minutes. ● In high humidity areas, if the paint film turns white, add an appropriate amount of F-1 nitrocellulose lacquer anti-whitening agent (whitening agent) to adjust it. This paint must be applied to a surface that has been primed; it has good adhesion to the primer. It is advisable to use a primer compatible with nitrocellulose lacquer.

Nitrocellulose Exterior Varnish Q01-1 Original Paint Appearance and Transparency Pale yellow, free of mechanical impurities and significant impurities, with a milky sheen.
Solids content, % > Film appearance
Viscosity (Ford Cup 1), S> Drying time, mins
Surface dry
Complete dry gloss, % ≤
Nitrocellulose varnish
34 Smooth and glossy
100
10
50
Nitrocellulose matte varnish
34 Smooth and matte
90
105020
Applications: This film is fast-acting, has good gloss and good adhesion, and is used for coating wooden containers and metal surfaces. It can also be used as a topcoat for enamel paints.

Yaowang For application, spraying is the primary method. Use X-2 nitrocellulose lacquer thinner (thinner) as the thinner. The ideal viscosity is 17-21S. Apply pressure of 3-5 kg/cm², and allow approximately 10 minutes between coats. If the lacquer film becomes brittle under humid conditions, add an appropriate amount of nitrocellulose lacquer moisture-proofing agent (water-based thinner) to adjust the consistency. When using clear varnish for topcoat or spraying wood, always lightly sand the surface with fine sandpaper beforehand to remove dust and impurities before applying the topcoat.